Therma-tru Doors Installation User Manual download pdf (Page 44)

Installation

1.44 2014 SITE 1

Transom Installation Instructions

ASSEMBLE JAMB EXTENDERS IF

USING 6-5/8” JAMBS.

APPLY JAMB EXTENDERS IF

APPLICABLE.

Align extension jamb with transom jamb so

inside surface of extension jamb is flush with

inside surface of transom jamb, and relief notch

is against transom jamb.

Nail and countersink extension jamb to transom

jamb with #8 finishing nails in pre-drilled holes.

#8 finishing nails

Align extender with transom. Orient so V-groove

for fastening is closer to transom frame.

Fasten entire perimeter, as shown, through

V-groove. Use 1” brads on 6” centers.

1” brads

Measure transom frame width and height.

The following are recommended height and width

dimensions. Use actual measurements to construct

jamb extender frame.

Cut extender

components to

match transom

dimensions.

Butt corners together

and fasten with 2 staples

or nails.

Height: 13-15/32"

Width

Height

(13-15/32”)

Door/Sidelite Slab Width

14” Sidelite 14”

12” Sidelite

3/0

5/0 Patio

5/4 Patio

5/8 Patio

6/0 Patio

3/0 w/12” S/L, Mulled

12”

36-5/32”

64-5/16”

68-5/16”

72-5/16”

76-5/16”

62-5/32”

63-5/32”

66-5/32”

67-5/32”

3/0 w/12” S/L, Boxed.

3/0 w/14” S/L, Mulled

3/0 w/14” S/L, Boxed

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 75 76

Comments to this Manuals

No comments

Therma-tru Doors Installation User Manual Page 44

Comments to this Manuals

Related products and manuals for For Home Therma-tru Doors Installation