Therma-Tru Fiber-Classic User Manual download pdf (Page 10)

9

12

13

#8 x 3 Pan Head Screws"

The sill's center screw needs

to be installed three inches

off center in the direction of

the active panel.

Using (12) #8 x 3 pan head screws, fasten

frame to rough opening through pre-drilled

holes in frame.

"

Apply a 1/4 continuous bead of clear

sealant along length of inactive sill riser

at locations shown.

"

SECURE FRAME IN ROUGH OPENING

APPLY SEALANT TO INACTIVE DOOR RISER

Sealant

Inactive sill riser

The sill does not have pre-drilled

holes. The screws used on the sill

are installed through the sill cap

base into the sill substrate. There

is a v-groove in the sill cap base

to assist in aligning the screw.

#8 x 3 Pan Head Screws"

Sill Cap Base

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments